3" ID to 2.38" ID - Gloss Black

3" ID to 2.38" ID - Gloss BlackThis 3 inch to 2 3 8 inch reducing silicone coupler is 3 inches long. Perfect for air to air aftercooler systems and turbocharger connections. Rated at 350 F continuous. Recommended clamps are 94100 0275 on the small end and 94100 0338 on the big end.

5" 45-degree elbows that connect to the MAF should be trimmed about 1/4" (BE CAREFUL

When a 90 degree elbow is not sharp enough

Includes pre-cut tubing and the grommet strip for the 4-1/4" hole

While you're at it

With our hose there is no need to replace your breather housing

This 90 degree silicone elbow is 3-1/8" ID on one end and 3" ID on the other and can be used anyplace you need a reducing 90-degree bend

This 4" OD aluminum elbow is used in air intake systems

This short 4" silicone coupler is only 2 inches long - the bare minimum to make a connection using standard clamps

The grommet around the 4-1/4" hole you drill in the fender

This 4 inch to 3 inch reducing silicone coupler is 3 inches long

This aluminum intake reducer is 4" OD on one end and 3

The "constant torque" feature of this clamp assures a firm hold