1/4 BSPP Bi-Directional Flow Control Valve

1/4 BSPP Bi-Directional Flow Control ValveSBA1B is a compact, bidirectional flowcontrol valve designed for precise speed regulation in small hydraulic actuators. It uses 14 BSPP ports and an adjustable needle to meter flow in both directions. Made from steel, the valve measures roughly 54 mm long and 76 mm high, with a 25 mm knob and M20 1 adjustment screw. It is rated for flows up to about 25 l min (6. 6 US gpm) and weighs only 0. 3 kg (0. 66 lb). Its small size and low flow rating make it

Weight: Roughly 0

they ensure smooth and safe transitions between stages in a hydraulic cycle

22-lt builtin tank

the VBD2BT blocks flow through the cylinder ports until pilot pressure is applied to the appropriate port

2 x rechargeable batteries

Fully proportional radio control that plugs directly into a Danfoss (or similar) control valve that has already been prepared for the radio / electrical actuation

There are two parts in this system: the first one must be fixed into the transmitter

CETOP 3 Manual Override Cap (Screw Type)

Independent system with 12 cm³/rev

Transmitter with proportional and additional non proportional outputs

compatible with Danfoss PVG32 for proportional control applications

MOD10 Installation Connection Diagram