2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 8 Inch 200MM Stroke (Model 0041503-4)

2000N Adjustable Stroke Linear Actuator with NC Magnetic Reed Switch 8 Inch 200MM Stroke (Model 0041503-4)This is a micro industrial linear actuator with an adjustable stroke and a standard stroke of 200 mm. It is equipped with two external normally closed magnetic switches that can slide freely, and by adjusting the position of these two normally closed magnetic switches, the linear actuator can be controlled to work within the set stroke length. For example, for a linear actuator with a stroke of 200 mm, you can set it to move within a stroke range of

Operating Voltage: 6V (2 x CR2032 -3V button cell batteries

a specified stroke of 580 mm is less than the standard stroke of the ordered actuator (600 mm)

The APP supports English

Two working modes

then the screen automatically shut down after 2 seconds

press button B until the LED screen displays "b06"

and the controller will adjust the running speed of each linear actuator

The receiver has reverse power protection and overcurrent protection

up to 8000 N / 800 kg / 1800 lbs at 5mm/s

Feature:  110~240VAC universal input  Protection types: Short circuit / Overload / Over voltage  Auto-recovery after protection  PWM control and regulation  100% full load burn-in test  Design with Built-in EMI Filter  LED indication for power on  Lower Power consumption

Transmitting Distance: 500m / 1500ft (theoretically)

Operating Voltage: 6VDC (model S2UW-DC06)