8 Inch 200MM IP67 Waterproof & Quiet Linear Actuator Built-in Hall Effect Sensor (Model 0041936-1)

8 Inch 200MM IP67 Waterproof & Quiet Linear Actuator Built-in Hall Effect Sensor (Model 0041936-1)This is an IP67 waterproof electric linear actuator with a Hall effect sensor, a stroke of 200mm, and a maximum thrust of 3500N (350 kg 780 lbs). The linear actuator is equipped with a waterproof breather valve, which allows air to freely flow in and out of the cylinder. When the linear actuator is running, a pressure difference will be generated inside and outside the cylinder, and air will flow in and out of the cylinder through the breather valve

Case size: 105 x 68 x 50 mm (4

5A Full Load Current about 3-6A Recommended Power Supply 1 actuator: 12V/10A or 24V/5A

Setting delay working mode:

1 x Receiver: S1PF3-DC

resulting in a retraction length of 235 mm

Operating Temperature: -20 °C ~ +70 °C

then three linear actuators will stop automatically

you can operate the linear actuator to extend or retract with the potentiometer

The orientation of the front connector is default

from 5 mm/second to 16 mm/second

a specified retraction length of 710 mm is less than the standard retraction length of the ordered actuator (735 mm)

a specified retraction length of 460 mm is less than the standard retraction length of the ordered actuator (485 mm)