Front schroefsets schroefset compatibel met Nissan S13 Silvia S13 180SX 240SX Shock Coil Struts Lowering Kit

Front Coilovers Coilover compatible for Nissan S13 Silvia S13 180SX 240SX Shock Coil Struts Lowering Kit

Dit MaXpeedingRods onderdeel is geschikt voor Nissan-toepassingen waar vermeld. Controleer altijd onderdeelnummer, bouwjaar, motorcode en pasvorm voordat je bestelt.

Voordelen

• Gebaseerd op originele MaXpeedingRods productinformatie
• Geschikt voor directe vervanging of prestatie-upgrade

Toepassing, specificaties en compatibiliteit

Introduction MXR-SLC based on MXR-SNA coilovers, which is also height adjustable but adds damping adjustment ability by a knob the top of the shaft. They are also made for street use, but the 24 level rebound damping control allows you the ability to perfectly dial in your coilover setup.You will experience better ride quality in all road conditions.Toepassing Geschikt voor Nissan S13 240SX 89-94 USA

geschikt voor Nissan S13 200SX 89-93 Europe

geschikt voor Nissan S13 Silvia 88-93 Japan

geschikt voor Nissan S13 180SX 89-99 Japan

geschikt voor Nissan S13 Sileighty 98 Japan Specificaties Top mounts: pillow ball top mount with camber plate front,

Damping: 24 levels rebound damping adjustable

Front Spring Rate: 8kg/mm(448lbs/in)

Adjustable Height: Yes lowering 1" to 3"

Shock type: Twin tube

Spring Preload: 7-10 mm

Color: gold Package includedproduct included: complete coilovers 2 front ；

a pair wrench for height adjustment.Dimension Gross weight: 12560kg

Package size: 73*28*21cm Kenmerken1. Lowered height adjustment from 1" - 3" which allow lower center of gravity and also add a more aggressive stance.

2.Camber plate top mounts help to eliminate the need for a separate camber kit.（Front Only)

3.Pillow ball top mount - It improves the steering feel and response.（Front Only)

4. Rubber top mounts help to deliver a smooth and forgiving ride for city use at any speed and rubber joints assist in absorbing hard impacts. (only rear)

5. Twin-Tube structure allows sufficient stroke within the shock absorber.

6. Complete Suspension Kit of 4 Shock Absorbers & 4 Springs for an easy installation.

7. Separate height adjustment does not affect damper stroke.

8. Height can be adjusted with coilovers installed on the vehicle.

9. High Tensile performance spring - STRESS TESTED OVER 600,000 times while the spring distortion is less than 0.04%. Plus the special surface treatment improves the durability and performance.

10. Height Adjustment tools included.

11. Full rebuildable.

12.A 24 rebound dampening adjustment level allows you the ability to perfectly dial in your coilover setup. You will experience better ride quality in all road conditions.